Computex FP-10 Flash programmer

From: ₹94,000.00

Flash programmer for ARM Cortex-M built-in/internal flash memory

Description

Manufactured by Computex Co. Ltd., Japan, FP-10 is known for it’s ease of operation, simplicity and robustness. FP-10 can program built-in/internal flash memory of ARM Cortex-M series in a matter of seconds.

Program data at mass-production/manufacturing sites.
Since same data is programmed repeatedly, flash memory can be programmed just by pushing the PROGRAM button. Success or failure of the operation is indicated by a 2 color LED and beeper. This keeps things simple, non-confusing and and non-time consuming. No special skill is needed to operate FP-10 this way.
Program data on hardware boards at software development/testing environments.
Since data changes often due to change in code, FP-10 can remain connected to the PC. Programming is done via C-Flash, the control software. Existing data on the flash memory can be read and saved as well.
Supply power to the target via FP-10.
Fp-10 has the capacity to provide power supply to the target. This eliminates the need to connect a power supply each time flash memory is programmed, thus saving time and effort.

Note: Product will be delivered within a maximum of 21 days after confirmation of payment.

Features

2 operation modes to suit your need:
- - - PC mode: Write to Cortex-M flash memory via PC.
      Suitable for use at software development environments where data to be written changes frequently or flash memory has to be updated frequently.
    - Stand-alone mode: Write to flash memory at a push of a button.
      Suitable for use at product manufacturing/production sites where the flash memory needs to be programmed before product shipment.
      No prior technical knowledge is needed.
Includes C-Flash, the dynamic software that allows you to:
- - - Set data to be programmed/written
    - Read/backup flash memory data
    - Program/erase flash memory
    - Perform check sum operations
    - Tweak write parameters
    - Perform various settings on the FP-10 unit
Super fast: Programming takes only a few seconds. Optimal settings that guarantee maximum write speed.
Simple yet adequate result indication in Stand-alone mode: Result is indicated by 2 color LEDs and beep sound.
Eliminate target hardware board power supply: Supply power to the hardware board/flash chip from FP-10 unit. No separate power supply is needed for the hardware board

*Power requirement of the hardware board has to be within acceptable limits
Automated writing support: Control the FP-10 unit from external equipment and write without human intervention.
Remote operation support: Program flash memory remotely using TCP socket application that communicates with C-Flash.

Supported CPUs

The following manufacturer’s Cortex-M CPUs are supported:

Cypress Semiconductor
Infineon Technologies
LAPIS Semiconductor
Microchip Technology
Nordic Semiconductor
NXP Semiconductors
Renesas Electronics
Silicon Laboratories
STMicroelectronics
Texas Instruments
Toshiba

How to operate

About Corex-M

ARM Cortex-M family are microprocessor cores which are designed for use in microcontrollers, ASICs, ASSPs, FPGAs, and SoCs. Cortex-M cores are commonly used as dedicated microcontroller chips. They are also “hidden” inside SoC chips as power management controllers, I/O controllers, system controllers, touch screen controllers, smart battery controllers, and sensors controllers.

Cortex-M are being used as a replacing for 8-bit microcontrollers that were very popular in the past. Cortex-M have become a popular replacements for 8-bit chips in applications that benefit from 32-bit math operations, and are replacing older legacy ARM cores such as ARM7 and ARM9.

Cortex-M chips find their use in appliances that need a very light firmware or OS running to service user needs. Some examples include everyday products like microwave ovens, toasters, washing machine, refrigerators etc.

FP-10 flash programmer provides a convenient way to program built-in flash memory of Cortex-M chips.

More about Cortex-M:
https://en.wikipedia.org/wiki/ARM_Cortex-M

Product URL

This product is manufactured by Computex Co. Ltd, Japan. Computex is a leading manufacturer of In-circuit Emlators/Debuggers and Flash programmers.

Refer this URL for product details (English):
https://www.computex.co.jp/eg/products/fp_10/index.htm

日本語の場合はこちらをご覧ください:
https://www.computex.co.jp/products/fp_10/index.htm

Support

It is our commitment to make sure that your problems are addressed at the earliest. To fulfill our commitment, support will be provided in the following manner:

Free consultation/online support via email/phone
Free remote desktop support with consent
On-site support for a fee (required to be paid beforehand)

Reviews

There are no reviews yet.

Be the first to review “Computex FP-10 Flash programmer”